About the Conference
The CEE 3rd National Power-Gen Environment Excellence Summit & Awards 2024, organised by the Council of Enviro Excellence, will highlight the industry’s ongoing efforts to improve air quality standards. Leading business figures, environmental specialists, and thermal power domain stakeholders will come together for thought-provoking talks and networking opportunities. With a special emphasis on advancements in the thermal power industry, the conference will explore a variety of strategies for enhancing air quality. Sessions dedicated to scaling up Flue Gas Desulfurization (FGD) systems for thermal sectors will also be focused on. Enhancing sustainability in the thermal power industry, the conference in Delhi this year will promote cooperation, knowledge sharing, and collaboration.
Market Scenario
Thermal power generation is a significant contributor to India’s energy landscape but also a major source of emissions, including particulate matter (PM), sulphur dioxide (SO2), nitrogen oxides (NOx), and carbon dioxide (CO2). The use of low-quality coal and outdated technology in thermal power plants (TPPs) exacerbates emissions.
For instance, a recent report by the Centre for Science and Environment (CSE) has highlighted the non-compliance of thermal power plants in Delhi-NCR with emission control norms:
Only two out of 11 plants in NCR have SO2 control measures, with just one meeting emission standards.
Three plants exceed PM norms, and four surpass NOx limits, predominantly in Haryana and Punjab.
Five plants lack adequate data reporting.
Despite strict emission norms introduced by the Ministry of Environment, Forest and Climate Change (MoEFCC) in December 2015, deadlines have been extended, and norms diluted. The initial deadline of December 2017 was extended by five years for most plants, except those in Delhi-NCR, mandated to comply by 2019. However, most plants in NCR failed to meet this deadline. Another extension was granted in March 2021, and subsequently in September 2022, extending the deadline for sulphur emissions reduction to December 2026.
SO2 and NOx emissions control in thermal power plants
Controlling sulphur dioxide (SO2) emissions is vital in thermal power plants (TPPs) to mitigate air pollution. Typically, coal combustion in boilers produces high-pressure steam, leading to SO2 emissions due to the sulphur content in coal. Flue gas desulphurisation (FGD) is a common method to control SO2 emissions, involving the reaction of flue gas with calcium carbonate or lime to form gypsum.
While India boasts a significant thermal power plant capacity, only a fraction of units are equipped with FGD systems. Wet FGD, the prevalent solution, utilises the wet limestone forced oxidation process to dissolve SO2 in water, forming calcium sulphite. Dry sorbent injection is another method, using alkaline sorbents to react with SO2 in the flue gas.
Nitrogen oxides (NOx), mainly from gas turbines, pose another challenge. Combustion modifications and overfire air injection are strategies to reduce NOx emissions. Selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR) are post-combustion techniques. SCR, particularly effective in coal-fired plants, involves injecting ammonia into the flue gas to react with NOx over a catalyst. SNCR injects ammonia directly into the combustion zone, reacting with NOx to form nitrogen and water.
To tackle NOx, state-generation corporations are adopting SCR technology to address the long-term impacts of NOx emissions. As thermal power remains a cornerstone of India’s energy mix, effective SO2 and NOx control measures are critical for environmental sustainability.
Flue gas desulphurisation (FGD)
Undoubtedly, India’s thermal power sector is undergoing a period of significant expansion, aiming to add 10 GW of capacity this year despite stricter emission norms. FGD systems are crucial for meeting these regulations, but their adoption faces challenges like high installation costs, space constraints in existing plants, and waste disposal requirements. To address this, the government has awarded bids for FGD installation in over 85 GW of capacity, reflecting an acknowledgement of the need for cleaner operations. However, overcoming hurdles through innovative design, exploring alternative technologies like dry scrubbers, and fostering research will still be essential for India’s thermal power sector to achieve cleaner growth alongside its ambitious capacity expansion goals.
There are signs that the Indian government is taking a multi-pronged approach to ensure reliable and cleaner thermal power generation. Recent policy changes have allowed for the import of cleaner-burning coal, offering a potential stop-gap measure while FGD adoption ramps up. Additionally, there is a growing focus on improving operational efficiency at existing coal plants, squeezing out more power while minimising emissions. These efforts, combined with continued investment in FGD technology, suggest India’s thermal power sector is on a path toward a more sustainable future.
Incorporating FGD: Challenges Involved
The reluctance of thermal power plants to install FGD systems stems from various obstacles. Foremost among these is the significant capital investment necessary for retrofitting existing facilities or integrating FGD technology into new plants. Concerns also arise regarding the potential impact on power tariffs, plant efficiency, and the operational complexities associated with incorporating FGD systems. These apprehensions have led to a widespread hesitancy within the industry to adopt FGD technology.
Further, determining the capital expenditure (CAPEX) for FGD plants entails a meticulous assessment of several factors, including plant size, technology selection, sulfur content in coal, and plant configuration. The challenge lies in accurately estimating the costs related to installation, operation, and maintenance of FGD systems. Additionally, uncertainties surrounding equipment costs, the availability of skilled manpower, and evolving environmental regulations further complicate the CAPEX calculations.
Factors influencing FGD technology selection
Several crucial factors need thorough evaluation before finalising the FGD technology for a specific plant. These include coal quality, unit size and number of units, space availability at the plant, availability of reagents and their purity levels, disposal of by-products, remaining plant life, auxiliary power consumption, and the efficiency of the FGD system. Each of these factors plays a significant role in determining the feasibility and cost-effectiveness of implementing FGD technology.
In addition to the factors mentioned above, other considerations such as life cycle costing, availability of water, consideration of a new stack or modification of the existing stack, and plant load factor (PLF) must also be taken into account. A holistic assessment integrating these factors into the capital expenditure (CAPEX) calculation is essential to provide a precise cost estimation and ensure the long-term economic viability of the FGD investment.
The Indian government’s ambitious targets for FGD system installation in thermal power plants by 2030 signal a pivotal step towards mitigating harmful emissions and enhancing air quality. Despite existing challenges, recent years have witnessed notable strides propelled by regulatory measures, financial incentives, and technological advancements. However, sustained endeavors are imperative to overcome technical, financial, and logistical hurdles and achieve the prescribed objectives.
While challenges like investment reluctance, CAPEX calculations, and waste management persist, progress is evident. Through concerted efforts, robust strategies, and collaboration among stakeholders, the industry can realize widespread FGD implementation by 2030, paving the way for a sustainable and environmentally conscious future in India’s thermal power sector.
Regulatory measures
Environment (Protection) Amendment Rules, 2021: Tightened emission norms for coal-fired plants, including stricter SOx and NOx limits. Perform Achieve and Trade (PAT) scheme: Incentivises older plants to upgrade emission control technologies.
The Ministry of Environment, Forest and Climate Change (MOEFCC) has further extended the deadlines set upon thermal power plants to reduce the emission of sulfurous oxides.
For plants within a 10-km radius of Delhi-NCR and cities with a population of more than 10 lakh, the deadline has been extended from December 31, 2022 to December 31, 2024.
For power plants within a 10-km radius of non-attainment cities, the deadline has been pushed from December 31, 2023 to December 31, 2025. For the remaining power plants across the country, the deadline has been postponed from December 31, 2024 to December 31, 2026.
Power plant units declared to retire before December 31, 2027, will be exempted from meeting the specified norms The Commission for Air Quality Management (CAQM) in the National Capital Region (NCR) and adjoining areas has set timelines for captive thermal power plants (CTPPs) to gradually replace coal with co-firing biomass and straw pellets. Targeting at least 5 per cent co-firing of biomass pellets, latest by September 30, 2023 and at least 10 per cent co-firing by December 31, 2023.
Do not miss this unique opportunity to delve deep into the thermal energy sector in India, understanding its challenges, innovations, and contributions to the broader energy transition. Register now to secure your spot at this specialised event hosted by the Council of Enviro Excellence
Who Should Attend?
- Central & State Power Generation Cos (Coal, Lignite & CCGT)
- Private Power Generation Cos (Coal, Lignite & CCGT)
- Government Officials (Policy Makers and Regulatory Authorities)
- FGD Technology Providers
- Power Plant O&M providers
- Power Plant EPC Contractors
- Captive Power Producers (Coal, Lignite & CCGT)
- Certification and Inspection Companies
- Power Plant Automation Solution Companies
- Government Training Institutions
- EPC Companies
Conference Draft AGENDA
| 10:00 – 10:30 am | Inaugural Session |
| 10:30 – 11.30 am | The evolving thermal power generation portfolio with a focus on cleaner fuel options, including gas, and reassessing the role of coal in the long-term energy mix |
| 11:30 – 12:30 pm | Harnessing Digital Power: Optimising FGD Operations with Automation and Data-Driven Insights |
| 12:30 – 01:00 pm | Case Study 1 |
| 1:00 – 2:00 pm | Lunch Break |
| 02:00 – 03:00 pm | Harnessing Digital Power: Optimising FGD Operations with Automation and Data-Driven Insights | A Glimpse into the Future: Emerging FGD Technologies for Enhanced Efficiency and Reduced Environmental Impact |
| 03:00 – 03:30 pm | Case Study 2 |
| 03:30 – 4:30 pm | The Power Plant Transformation: Analyzing Operational Changes and Infrastructure Integration with FGD Systems | Beyond Emissions: Exploring the Social and Economic Benefits of Cleaner Air Enabled by FGD Adoption |
| 04:30 – 05:30 pm | Demystifying Carbon Capture, Utilization, and Storage (CCUS) Technologies for Decarbonization of Thermal Power |
| 5:30: pm | Closing Remarks |
| 10:15 – 10.30 am | Inaugural Session |
| 10.30 – 11.30 am | Unveiling the Regulatory Maze: Understanding Flue Gas Desulfurization (FGD) Norms and Financing Strategies in India |
| 11:30 – 12:00 pm | Case Study 1 |
| 12:00 – 01:00 pm | Bridging the Water-Energy Gap: Exploring Sustainable FGD Technologies and Waste Management Solutions |
| 1:00 – 2:00 pm | Lunch Break |
| 02:00 – 03:00 pm | Flue Gas Desulfurization (FGD) System Optimization for Enhanced SO2 Capture Efficiency in Indian Thermal Power Plants. |
| 03:00 – 03:30 pm | Case Study 2 |
| 03:30 – 5:30 pm | The CEE Awards |
| 5:30: pm | Closing Remarks |
PPT Presentations
THE CEE 3rd National Power-Gen Environment Excellence Awards 2024
The CEE 3rd National Power-Gen Environment Excellence Awards 2024 is intended to award the UNIT’s which has shown improvements in its key environmental parameters such as CO2, SO2, & NOx emissions, Particulate Matter emissions, disposal and utilization of Ash, etc, through Excellence in environmental sustainability.
IPP
- Best Environment Excellence Unit - COAL Below 250 MW Unit
- Best Environment Excellence Unit - COAL 250 - 500 MW Unit
- Best Environment Excellence Unit - COAL Above 500 MW Unit
- Best Environment Excellence Unit - LIGNITE Below 125 MW Unit
- Best Environment Excellence Unit - LIGNITE 125 - 250 MW Unit
- Best Environment Excellence Unit - LIGNITE ABOVE 250 MW Unit
- Best Environment Excellence Unit - CCGT Below 125 MW Unit
- Best Environment Excellence Unit - CCGT Above 125 MW Unit
CPP
- Best Environment Excellence Unit - CPP COAL Below 50 MW Unit
- Best Environment Excellence Unit - CPP COAL 50 - 135 MW Unit
- Best Environment Excellence Unit - CPP COAL ABOVE 135 MW Unit
- Best Environment Excellence Unit - CPP LIGNITE – Unit
- Best Environment Excellence Unit - CPP CCGT – Unit
- Best Environment Excellence WHR Plant of the Year
Specialised Award - Public Sector
- Best Environment Excellence Plant of the Year
- Best Environment Excellence Team of the Year
- Environmental Leader of the Year
- Best Performing FGD Unit of the Year
- Best Retrofitted Units of the Year
- Excellence in Fly Ash Utilization / Disposal and Utilization of Fly Ash Plant of the Year
Specialised Award - Private Sector
- Best Environment Excellence Plant of the Year
- Best Environment Excellence Team of the Year
- Environmental Leader of the Year
- Best Performing FGD Unit of the Year
- Best Retrofitted Units of the Year
- Excellence in Fly Ash Utilization / Disposal and Utilization of Fly Ash Plant of the Year
This recognition program holds immense value as it not only celebrates the achievements of these forward-thinking organizations but also highlights their exemplary efforts to adopt sustainable practices. By shining a spotlight on their accomplishments, the awards program effectively inspires and encourages other companies and thermal power plants to emulate their success.
Proud Winners
CEE Power-Gen Environment Excellence Award
Winner 2022
At the Air Quality Control System Conference 2022, the CEE National Environment Excellence Award 2022 was launched to recognize innovative solutions in the thermal power sector. Among 65 applications, 22 plants were selected for the prestigious honor, celebrating their outstanding performance, excellence, and commitment to sustainability.
- Adhunik Power & Natural Resources Ltd
- ANGUL ENERGY LIMITED
- Bharat Aluminium Company Limited (BALCO)
- Dalmia Cement (Bharat) Limited - Ariyalur
- Dalmia Cement (Bharat) Limited - Dalmiapuram
- Dhariwal Infrastructure Limited
- Gujarat State Electricity Corp Ltd - Gandhinagar Thermal Power Station
- Gujarat State Electricity Corp Ltd - Sikka Thermal Power Station
- Gujarat State Electricity Corp Ltd - Wanakbori Thermal Power Station
- JINDAL POWER LIMITED
- Jaypee Nigrie Super Thermal Power Plant
- MAHAGENCO - Bhusawal Thermal Power Station
- MAHAGENCO - Chandrapur Super Thermal Power Station
- MAHAGENCO - KHAPERKHEDA Thermal Power Station
- MAHAGENCO - Parli Thermal Power Station
- Neyveli New Thermal Power Station - NLC INDIA
- NTPC Limited - Barh Thermal Power Station
- NTPC Limited - Kahalgaon Super Thermal Power Station
- NTPC Limited - Mouda SuperThermal Power Station
- NTPC Limited - Singrauli Super Thermal Power Station
- Talwandi Sabo Power Limited
- Tata Power Company Ltd - Jojobera Power Plant
Winner 2023
At the Air Quality Control System Conference 2023, the CEE National Environment Excellence Award 2023 was launched to recognize innovative solutions in the thermal power sector. Among 94 applications, 34 plants were selected for the prestigious honor, celebrating their outstanding performance, excellence, and commitment to sustainability.
- ACB (India) - Maruti Clean Coal and Power Limited
- Adani Dahanu Thermal Power Station
- Adani Power Limited – Raikheda
- Adani Power Limited - Mundra Thermal Power Plant
- Angul Energy Limited
- Bharat Aluminium Company Limited ( BALCO)
- DB POWER LIMITED
- DVC - DURGAPUR STEEL THERMAL POWER STATION
- DVC - Koderma Thermal Power Station - DVC
- GSECL - Ukai Thermal Power Station
- GSECL - Wanakbori Thermal Power Station
- Hindalco Industries Birla Copper Bharuch
- Hindalco Industries Ltd - Mahan Aluminium
- Jaypee Nigrie Super Thermal Power Plant
- JINDAL STAINLESS LIMITED
- JINDAL POWER LIMITED
- JSW Energy (Barmer) Limited
- JSW ENERGY LIMITED VIJAYANAGAR
- JSW Ispat Special Products Limited
- MAHAGENCO - Bhusawal Thermal Power Station
- MAHAGENCO - CHANDRAPUR SUPER THERMAL POWER STATION
- Nabha Power Limited
- Neyveli New Thermal Power Station - NLC India Limited
- NLC Tamilnadu Power Limited
- NTPC Limited - Kahalgaon Super Thermal Power Project
- NTPC Limited - Mouda Super Thermal Power Station
- NTPC Limited - Solapur Super Thermal Power Station
- NTPC Limited - Singrauli Super Thermal Power Station
- OPG Power Generation Private limited
- TATA POWER COMPANY LIMITED - JOJOBERA POWER PLANT
- TATA STEEL LONG PRODUCTS LTD
- WBPDCL - BAKRESWAR THERMAL POWER STATION
- WBPDCL - SANTALDIH THERMAL POWER STATION
- WBPDCL - SAGARDIGHI THERMAL POWER PROJECT
- Environment Leader of the Year for Public Sector - - Mr SANJOY KUMAR GHOSH - Damodar Valley Corporation
- Environment Leader of the Year for Private Sector - Mr Santosh Kumar Singh - Adani Power Limited
Registration Process
To participate as Delegates / nominate for Awards / be a Speaker fill and submit online form from the links below.
We will email you an invoice along with necessary required documents for processing the payment. The original invoice shall be sent to your postal address.
Make online payment via our secured payment gateway using your Credit Card or Bank Transfer or send Cheque / DD to our postal address.
- Indian Delegate INR 20000 + 18% GST
- Overseas Delegate USD 300 Per Delegate
- Group Discount 5% For 3+ Participants 10% For 5+ Participants
- Award INR 30000 + 18% GST
- Discount 5% For 2 Categories 10% For 5+ Categories
- Indian Speaker INR 50,000 + 18% GST
- Overseas Speaker USD 800
Please Note*
- For each Award category, only one participant is permitted.
- In case additional participants (of existing Award nominee) who wish to attend the event, will be charged a discounted price of INR 15,000 + GST per participant.
- In each category, only 5 nominations are permitted.
- Only the first 5 applications will be eligible for consideration.
- Accurate participant information and details must be provided during registration.
- The online registration is considered final, and no cancellations will be allowed once the registration is completed.
- Successful online registration will result in a confirmation sent to the provided email address.
- This is a non-residential event, and attendees are responsible for arranging their own accommodation and transportation to the venue.
- In case of technical issues with the online registration system, participants are encouraged to contact support (+ 91 98214 19110) for assistance
Key Dates
March 1st 2024
June 13th 2024
June 27th 2024
Sponsorship
A sure fire way for your firm to emerge as a thriving leader in this proliferation industry would be to sponsor CEE’s National Power-Gen Environment Excellence Summit & Awards 2024 conference. This will successfully leave a powerful and lasting brand impression in the minds of pivotal decision-makers.
Our promotional and marketing campaigns will help you garner
publicity.
Event marketing collateral will promote your corporate brand, logo, and profile. This will help you establish yourself as an industry leader.
Gain access to our classified delegate list that is so painstakingly and diligently created.
Virtual meet and greets and socializing with government officials, industry leaders, specialists and senior level delegates.
Receive the honor of addressing an audience filled with industry decision-makers and leading executives as the primary speaker.
This offers a chance for your administrators to discover your role better and uncover new business opportunities in the sector.
Documentation at the conference will generate lasting mementos of your product or services.
Our partners will provide brand building possibilities, higher exposure and so much more.
Type of Sponsor
| Sponsorship Opportunities |
Generator (Principal Sponsor)
INR 800,000 / USD 11,000
|
Terawatt (Powering Sponsor)
INR 650,000 / USD 8700
|
Gigawatt (Knowledge Sponsor)
INR 550,000 / USD 7500
|
Megawatt (Supporting Sponsor)
INR 450,000 / USD 6500
|
Kilowatt (Associate Sponsor)
INR 350,000 / USD 5000
|
Lunch Sponsor INR 250,000 / USD 3500 | Welcome Kit Sponsor INR 200,000 / USD 3000 |
| Maximum Sponsors Permitted | 1 | 2 | 3 | 3 | 3 | 2 | 4 |
| Auditorium Stage Sponsor Branding | |||||||
| Branding on Conference Website | |||||||
| Screening of Corporate film during various session breaks (Duration – minutes) | Upto 5 minutes | Upto 3 minutes | Upto 2 minutes | ||||
| Branding on Linkedin | |||||||
| Special Announcements of Thanking Sponsors | |||||||
| Sharing of Conference Delegates list (List will be shared after the event) | |||||||
| Delegate Passes | 8 Delegate Passes | 6 Delegate Passes | 4 Delegate Passes | 4 Delegate Passes | 3 Delegate Passes | 3 Delegate Passes | 2 Delegate Passes |
| Sponsor presentation opportunity ) | 1 Slot 30 Minutes | 1 Slot 30 Minutes | |||||
| Panel Discussion Panellist | |||||||
| 1 Award Nomination | 1 Award Nomination | ||||||
| Branding space in lobby | |||||||
| Lobby Sponsor TV AV (with Audio & Visual) | |||||||
| Promotional Corporate Standee at the pre-function area | |||||||
| Distribute Brochure in Delegate Welcome Kit | |||||||
| Standee acknowledging lunch sponsorship at the lunch venue | |||||||
| Logo on the Bags, Badges/ Lanyard of the participants |
Mr. Sachin Chavan
Head Corporate Alliance & Partnerships
Call: +91 98212 09403
Email: sachin@ceexcellence.org
